Meet your Robot!

Owned by Richard Margolin (Unlicensed), created
Last updated: Dec 27, 2021 by Daniel Crosby (Deactivated)
1 min read

Instructions

  1. Open the box or clam shell case that is inside the outer packaging.

  2. Open the clam shell case in which the robot arrived. This is a permanent protective case in which your robot should be stored when not in use for more than a few days.

  3. The protective film on the touchscreen can be removed once the robot reaches it’s intended final destination.

  4. In your box, you will have 1 robot with protective head cover, a getting started guide, 1 battery, 1 power supply and power cable and 1 screwdriver for inserting the battery.

  5. When storing the robot, we recommend putting it in the plastic bag before placing it in the case. The plastic head protector is mainly needed during robot shipping and does not need to be retained.

 

For additional steps in the process, see .