RoboKind Companion App Installation and Update Guide (iPads)

Introduction

The RoboKind® Companion 4.2 is our latest application for managing learning experiences with children on our Robots4Autism Product.

If you are using version 4.2 or earlier, please consider updating for the latest features including IEP support, lesson cueing events, note taking, favorite lessons, lesson speed controls, and more. See https://robokind.atlassian.net/wiki/spaces/CSSD/pages/2378662159 and https://robokind.atlassian.net/wiki/spaces/CSSD/pages/2472116241 for more information on recent releases.

 

Requirements


  • Any iPad, iPad Air, iPad Mini, or iPad Pro which is updated to iOS 11.0 or later.

  • Apple iPad devices with at least 3 GB free. How to check iPad free space

  • Ability to sign in to the iPad and download software from the Apple App Store®. In some organizations, it may be necessary to work with the IT department to allow applications to be installed.

  • WiFi and an Internet connection speed of 5 Mbps is recommended.

  • Student and Facilitator must have separate iPad’s devices.

Note that RoboKind also has a web companion option, which can replace the need for one of the tablets. https://robokind.atlassian.net/wiki/spaces/CSSD/pages/2116583525

If technical issues are experienced during setup, see

 

Update Instructions:

If you are starting a lesson using a Companion App version that is below the recommended version, you will see the following screen.

  • Skip - if you are in a session with a student, you can skip the update and complete it later.

  • Release notes - links you to the service desk articles with recent release information.

  • Update Now - This will take you to the AppStore page where the app can be downloaded. This usually takes about 5 minutes, and it is not necessary to re-pair tablets after the update.

First Time RoboKind Companion Installation Instructions:

  1. Ensure that the above requirements have been met.

  2. Scan the QR code with the iPad’s camera app, or go to this link. It is also possible to search for RoboKind Companion in the App Store.

  3. Click install (or update)

  4. Verify that the white “4.2” banner appears across the RoboKind icon on each iPad.

RoboKind Companion Update Instructions:

Option 1: Update from the RoboKind Companion App

If you are on version 3.5.2 or later, then you will be prompted to update upon starting the application. If the application was already running, then you may need to close and re-open it by double tapping on the home button, and sliding the application off the screen before reopening it.

Option 2: iOS 13.0 or later:

  1. From each iPad, open the Apple App Store®

  2. If there is a today option at the bottom of the screen, tap it.

  3. Tap on the Profile icon in the top-right corner.

  4. Scroll down to Pending Updates, locate the RoboKind Companion application, and choose update.

If the RoboKind Companion app does not have an update option, then the application is already up to date.

Option 3: iOS version older than 13.0 (Not actively supported by RoboKind):

  1. From each iPad, open the Apple App Store®

  2. Tap on the Updates tab

  3. Locate the RoboKind Companion 3 application and choose update.

Removing older companion app versions

The following companion app versions are obsolete and it is recommended to be delete these from iPad’s to avoid confusion.

 

Additional information: