Micro SD Card Installation Instructions for Your Robot
Important: Please adhere to the following instructions to ensure the proper installation of the Micro SD card into your robot. Incorrect handling or installation can lead to system malfunctions or damage.
Required Materials:
Micro SD card provided by RoboKind. (Marked with an “E”)
Installation Process:
1. Powering Off the Robot:
Ensure the robot is completely powered off before proceeding with the installation of the Micro SD card. This is crucial to prevent any electrical damage or data corruption.
2. Identifying the Micro SD Card Slot:
Locate the Micro SD card slot on your robot. It is positioned on the back of the robot and is distinctly marked as "Micro SD."
3. Inserting the Micro SD Card:
Hold the Micro SD card so the metal contacts face downwards.
Carefully insert the card into the slot until you feel a click, indicating the card is securely in place.
4. Powering On the Robot:
With the Micro SD card correctly installed, you may now power on the robot. The system should initiate without any complications.
Important Notice:
Micro SD Card Exclusivity:
Do not attempt to use the installed Micro SD card with another robot. Once the Micro SD card is inserted into a robot, it becomes configured specifically for use with that robot only.
Handling Precautions:
To prevent data loss or corruption, avoid touching the metal contacts of the Micro SD card. Static electricity or physical damage to the contacts may impair functionality.
Troubleshooting:
If the robot fails to boot after the Micro SD card installation, verify that the card is correctly inserted and check for any visible signs of damage to the card or robot. For further assistance, consult the troubleshooting section of your user manual.
Contact Information:
Should you require additional support or have any inquiries, please reach out to our customer service team using the contact details provided in your robot kit's documentation.