Troubleshooting - Companion App 3 Unable to Connect Tablet to Robot

Troubleshooting - Companion App 3 Unable to Connect Tablet to Robot

Problem

Our pairing processes for robots and tablets has been replaced with an easier process in our 3.2 software, and the following instructions apply only to old versions of our software. If you are still running on a companion app version earlier than 3.2, please see our https://robokind.atlassian.net/wiki/spaces/CSSD/pages/1313931539.

Troubleshooting QR Code not working

If you are getting no error message at all when trying to scan the QR Code on the robot, then it’s possible that the robot is not successfully providing the required network information to the tablet, which we have seen with some WiFi configurations.

  1. Instead of using the QR Code to connect to the robot, please try to connect using the IP Address method on the right hand side of the screen on the facilitator tablet. How-to Show the IP Address of the Robot

  2. An alternate way of checking to see if the QR code on the robot is working is to use a smart phone in camera mode and see if it successfully detects the network information on the robot. If not, the QR Code method will not work with your configuration.

Troubleshooting Connection Refused

If you are getting a red “Connection refused” message on the tablet when you attempt to scan the QR code on the robot or when you attempt to connect by IP Address, then check the following:

  1. Run a network test on the robot and ensure that all tests are passing. How-to Run a Robot Network Test

  2. Ensure that you are able to log in to your RoboKind account at https://central.robokind.com.

    1. If this works, that will confirm that your account has been migrated to our 3.0 platform.

    2. If you are still using your account at https://portal.robokind.us, then please see RK Central 3.0 Platform - Pre migration check list.

    3. If you are having difficulty logging in, try the reset password option. If you do not receive an e-mail within 30 minutes and you have checked your spam filter, then please create a support ticket at RoboKind Support - Login & Password Assistance.

  3. On each iPad, make sure you are using the RoboKind Companion 3 application, which has a 3.0 banner across the icon. How-to check your RoboKind Companion App Version

  4. On the iPad, go into settings, scroll down and find the RoboKind Companion 3 application, and ensure that the Local Network option is turned on.

  5. On the robot, check the software version using Utilities - About - Software Version and ensure that the Speech/Animation Server shows a version of 3.0.0-9 or later.

    1. If you see an earlier version number, then see How-to Update the Robot.

    2. If after updating the robot your version still shows an earlier version, then please submit a support ticket with your robot’s serial number using this link: Robot Migration Request

  6. Check the IP Address on both the tablet and on the robot, and ensure they are on the same network. If not, the routers or switches between these networks may be blocking traffic. How-to Show the IP Address of the Robot See our networking requirements in the top section of RoboKind Quick Network Setup Guide.

  7. Note that in some cases, WiFi security may prevent direct communication between tablets and robots, as is required for this application. See our RoboKind Quick Network Setup Guide for a description of port isolation or AP isolation settings that may cause this. Solutions may include:

    1. Disabling port isolation restrictions. Port isolation is commonly used with public wifi hotspots and other situations where direct communication between devices is not desirable, but does indeed prevent direct communication between the tablets and robots.

    2. Placing robots and tablets on a separate WiFi network that allows communication between devices.

Related articles