Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Problem

Get assistance when you are unable to scan the QR Code

Solution


  1. Try to manually enter the IP address of the robot into the application. The IP address can be found at the top of the display on Milo’s chest.
  2. Please review and verify the following information if the IP address does not work:
    1. “How-to Run a Robot Network Test”
    2. “How-to verify the Robot and Tablets are on the Same Network”
    3. “How-to Confirm the Robot Settings are Compatible with the Application”
  3. Please submit a ticket if the issue is still present.



  • No labels