...
Verify Milo is on a network by looking at the internet emblem on the top right of his chest.
If there is an X over the emblem, the robot is not connected to a network. Please follow the steps found in the RoboKind Quick Network Setup Guide.
Select the Utilities button on Milo’s chest.
Select the Network button and then the Set-up Wi-Fi button.
The Wi-Fi network Milo is connected to will have an asterisk (*) to the left of the name.
If the Robot is not connected to the correct network for the location, then use the Saved Wi-Fi button to connect the robot to the correct network.An X will indicate a robot not connected to WiFi
A WiFi symbol will communicate signal strength. If your signal strength is 2 bars or less, see https://robokind.atlassian.net/wiki/spaces/CSSD/pages/622821416/Robot+has+weak+Wi-Fi+signal?search_id=7567959d-013d-49bb-b4e5-015a869ad81a.
To further manage WiFi settings, choose Utilities then Network.
If connecting to a new WiFi network, choose Setup WiFi, select the desired network, and press OK to enter the connection settings. This should be the same network to which the iPad’s are being connected.
If your robot is used in multiple locations and you need to connect it to a different network after moving the robot, use the Saved WiFi button to view the list of saved WiFi connections, then Select the correct connection and choose Connect.
Checking the iPad network settings on facilitator and student tablets:
...
If you do not know the network information for the location, please contact your IT service desk.
The first time you try to connect a tablet to a robot, the iPad may block a connection with a message RoboKind Companion 3 would like to find and connect to devices on your local network.
After clicking OK, you will need to re-attempt the connection.
If you received this message and did not click OK, you will need to go into the iPad settings, locate the RoboKind Companion 3 app, and turn on the Local Network setting.
The most common issues that prevent normal operation can be prevented by following the steps at the top of the RoboKind Quick Network Setup Guide.
If the robot has recently moved to a new physical location, it may be necessary to reconnect it to the new network even if the connection was previously saved. (See step 5 under Checking the Robot's Assigned Network)
Related articles
| Filter by label (Content by label) | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...