...
Problem
| Info |
|---|
...
Solution
...
Conducting a RoboKind lesson with a robot requires pairing a tablet to the robot before starting the session. This article details the steps to connect or troubleshoot this connection as needed. |
Ensure that the robot is connected to the network, and that it has an IP Address.
If not, see RoboKind Quick Network Setup Guide
If yes, make note of the IP Address, i.e. 10.0.0.107 as shown as the example here.
Attempt to connect to the robot by using the QR Code.
On the robot’s control panel, choose the menu items to display the QR code.
Within the RoboKind companion app, click on the QR code icon to turn on the camera, which you will point at Milo’s chest screen showing the QR code.
The pairing should complete automatically.
Manually enter the IP address of the robot into the RoboKind Companion application.
...
...
...
...
...
...
...
Related articles
| Filter by label (Content by label) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
|
...
|
...
| Page Properties | ||
|---|---|---|
| ||
|